1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

TPLINK W9980 Router

Discussion in 'Hardware' started by mojorisin, Jul 23, 2016.

  1. mojorisin

    mojorisin Kilobyte Poster

    395
    14
    41
    Does anyone know anything about setting up the above routers VLAN option

    I set port 4 to use a different range ie 192.168.2.100 - 200 and even setting the default gateway as the range i was on 192.168.1.254 i could not connect to the exsi machine i had setup on another pc

    trying to have separate range from my default network
     
    WIP: 70-685 http://www.speedtest.net/result/3377759783.png
  2. Sparky
    Highly Decorated Member Award

    Sparky Zettabyte Poster Moderator

    10,190
    296
    319
    I couldn't see any VLAN options in the spec mate - just a basic switch on the router.

    http://www.tp-link.com/en/products/details/cat-15_TD-W9980.html#specifications
     
    Certifications: MSc MCSE MCSA:M MCSA:S MCITP:EA MCTS(x5) Security+ Network+ A+
    WIP: Exchange 2007\2010
  3. mojorisin

    mojorisin Kilobyte Poster

    395
    14
    41

    On this page of the manual it has Interface Grouping options VLAN if i configure the settings for a port then the machine in questions does get the details just that i can then no longer control it from my machine as the ip range is different

    http://www.manualslib.com/manual/835509/Tp-Link-Td-W9980.html?page=44

    i am currently on 192.168.1.xx and the other is on 192.168.2.xx
     
    WIP: 70-685 http://www.speedtest.net/result/3377759783.png
  4. SimonD

    SimonD Terabyte Poster Moderator

    3,463
    397
    199
    So where have you configured the VLAN on the clients? You need to tag traffic somewhere to let it know it's a VLAN tag.

    You may want to read up about exactly what it is that you're trying to do and whether VLANs are the right thing or not.
     
    Certifications: CNA | CNE | CCNA | MCP | MCP+I | MCSE NT4 | MCSA 2003 | Security+ | MCSA:S 2003 | MCSE:S 2003 | MCTS:SCCM 2007 | MCTS:Win 7 | MCITP:EDA7 | MCITP:SA | MCITP:EA | MCTS:Hyper-V | VCP 4 | ITIL v3 Foundation | VCP 5 DCV | VCP 5 Cloud | VCP6 NV | VCP6 DCV | VCAP 5.5 DCA
    WIP: VCP6-CMA, VCAP-DCD and Linux + (and possibly VCIX-NV).
  5. Sparky
    Highly Decorated Member Award

    Sparky Zettabyte Poster Moderator

    10,190
    296
    319
    On port four can you ping the default gateway of 192.168.2.254 (assume this is what you made it). Checked the manual and it does talk about grouping interfaces together to make a VLAN. No mention of your VLANs being able to route to each other which may be the issue here.
     
    Certifications: MSc MCSE MCSA:M MCSA:S MCITP:EA MCTS(x5) Security+ Network+ A+
    WIP: Exchange 2007\2010

Share This Page

Loading...