setup dhcp server or router

Oh man! Ad-blocking software has been detected! :'(

This website is run by the community, for the community... and it needs advertisements in order to keep running. Blocking our ads means your killing our stats!
Please disable your ad-block, or become a premium member to hide all advertisements and this notice.

situation :

web, htp, mail n dns server (172.16.4.0/28 ) connect to switch then connect to router in packet tracer.
2 pc(172.16.4.0/26) connect to switch then connect to same router.
2 pc assign dynamic ip.

how to assign ip with easy way? in router or dhcp server?
how to counfigure? help .. mee

 

Oh man! Ad-blocking software has been detected! :'(

This website is run by the community, for the community... and it needs advertisements in order to keep running. Blocking our ads means your killing our stats!
Please disable your ad-block, or become a premium member to hide all advertisements and this notice.

ip dhcp excluded-address 172.16.4.1
!
ip dhcp pool LAN
network 172.16.4.0 255.255.255.192
default-router 172.16.4.1
dns-server 172.16.4.?
domain-name whatever.ad.local

interface Vlan1
description ** LAN at whatever **
ip address 172.16.4.1 255.255.255.192
no keepalive
hold-queue 100 out
no shutdown

depends on your router but above is a cisco 877

 

Why do your IP ranges overlap....
172.16.4.0/26 - subnet with 62 hosts.... 172.16.4.1 - 62
172.16.4.0/28 - subnet with 14 hosts.... 172.16.4.1 - 14

Are you playing with VLSM...? If you are i would suggest two VLAN's with the router configured as a router-on-a-stick and the following IP range so they do not overlap -
172.16.4.0/26 - subnet with 62 hosts.... 172.16.4.1 - 62
172.16.4.64/28 - subnet with 14 hosts.... 172.16.4.65 - 78


The DHCP config by ITCROWD is correct.

Also, Try and introduce yourself as a new user when you post for the first time, generally people will respond better and if we know you are studyinh CCENT/CCNA then we know where you are at!

Cheers
Jon

 

i am new about to setup network. by using packet tracer 5.3.

the task like this:

 

We cant do the task for you..... ask questions in the relevant area and we can assist or it would be cheating??

It looks from the task set that you need to understand VLSM. you need to know how you can segment out a range of addresses with VLSM's!
The following link explains/shows you how to design VLSM which once you have nailed it, is pretty simple thereafter!
http://www.robriggins.com/ccna/site..._completed_labs/ccna2_chapter6_robriggins.pdf

Hope it helps.
Jon