1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Cisco Access Server - Help Required

Discussion in 'General Cisco Certifications' started by Fluid, May 6, 2009.

  1. Fluid

    Fluid Byte Poster

    180
    0
    14
    Hi everyone,

    Im thinking about configuring a Cisco Access server as I have 2 switches and 3 routers in my lab, but from the documentation which I have read they state i require an octal cable. I have looked around on the internet for octal cables and they are around £130!!!! Is there a cheaper solution?:ohmy
     
  2. Spice_Weasel

    Spice_Weasel Kilobyte Poster

    254
    45
    45
    Sadly the octal cables are expensive. You could try making your own, but the cost of parts, time and effort are high even if you try a homemade octal cable.

    Pinouts are here if you try to make your own:

    http://www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a00801c9a10.shtml

    Spice_Weasel
     
    Certifications: CCNA, CCNP, CCIP, JNCIA-ER, JNCIS-ER,MCP
    WIP: CCIE
  3. Bonneville

    Bonneville Bit Poster

    30
    0
    12
    There's always eBay. Bought mine from there ages ago.
     
    Certifications: MCSE, CCNA
    WIP: CCNA Security, CCNP

Share This Page

Loading...