Mentor FR4II Router

Discussion in 'Networks' started by law123, Jan 22, 2006.

  1. law123

    law123 Byte Poster

    189
    0
    33
    Hi I have a Mentor FR4II Router (This One) I was wondering if anyone can knows where I can get information on setting up port forwarding for this router. As I use Emule and I am not able to set it up to used with it. If I don’t use the router I am able to use Emule without any problem. The sad thing is I had this problem before and managed to sort it out on my own. But I just can’t do it this time.

    So looking for some info on this router I have the manual but I feel it is vague.
     
    Certifications: None
    WIP: A+
  2. simongrahamuk
    Honorary Member

    simongrahamuk Hmmmmmmm?

    6,205
    136
    199
    Have you tried a techs best friend?

    8)
     
  3. law123

    law123 Byte Poster

    189
    0
    33
    Yes been there but can't find much info on this apart from security issues
     
    Certifications: None
    WIP: A+
  4. Sparky
    Highly Decorated Member Award 500 Likes Award

    Sparky Zettabyte Poster Moderator

    10,718
    543
    364
    Certifications: MSc MCSE MCSA:M MCSA:S MCITP:EA MCTS(x5) MS-900 AZ-900 Security+ Network+ A+
    WIP: Microsoft Certs
  5. law123

    law123 Byte Poster

    189
    0
    33
    Yes Sparky

    I can log on to router set the ports that are on that page. But when I try testing ports I get:-

    Starting TCP connection test...
    TCP test failed! UDP test will not be performed.

    Connection test finished.
     
    Certifications: None
    WIP: A+
  6. Sparky
    Highly Decorated Member Award 500 Likes Award

    Sparky Zettabyte Poster Moderator

    10,718
    543
    364
    Do you have any software firewalls installed on your PC? This also includes Windows firewall.

    Also where do you run the connection test, is this a utility on the firewall or is it part of the emule software?
     
    Certifications: MSc MCSE MCSA:M MCSA:S MCITP:EA MCTS(x5) MS-900 AZ-900 Security+ Network+ A+
    WIP: Microsoft Certs
  7. Bluerinse
    Honorary Member

    Bluerinse Exabyte Poster

    8,878
    181
    256
    Sparky Law has said this...

    From that I would say that the issue is not with a software firewall but it is indeed with the router config.
     
    Certifications: C&G Electronics - MCSA (W2K) MCSE (W2K)
  8. law123

    law123 Byte Poster

    189
    0
    33
    Yes Pete

    I think it is with the router config. Just can't seem to figure this one out I have been at it for days on and off before I posted here.

    George
     
    Certifications: None
    WIP: A+
  9. arisen

    arisen Byte Poster

    243
    15
    46
    Certifications: BEng, PRINCE2, ITIL, Net+
    WIP: MSc, Linux+ 2009, RHCE
  10. Bluerinse
    Honorary Member

    Bluerinse Exabyte Poster

    8,878
    181
    256
    Certifications: C&G Electronics - MCSA (W2K) MCSE (W2K)
  11. Sparky
    Highly Decorated Member Award 500 Likes Award

    Sparky Zettabyte Poster Moderator

    10,718
    543
    364
    whoops! :oops:

    any update law123?

    The link posted by arisen seems to cover the whole setup.
     
    Certifications: MSc MCSE MCSA:M MCSA:S MCITP:EA MCTS(x5) MS-900 AZ-900 Security+ Network+ A+
    WIP: Microsoft Certs
  12. law123

    law123 Byte Poster

    189
    0
    33
    Sorry guys I have not let you know any update as of yet have been busy with other things. I only read the post so I am going to try now and will update soon.

    Thx arisen yes that looks exactly what I am looking for. :thumbleft
     
    Certifications: None
    WIP: A+
  13. law123

    law123 Byte Poster

    189
    0
    33
    Thanks guys that worked perfect.

    :super
     
    Certifications: None
    WIP: A+

Share This Page

Loading...
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.