Recent Content by Spice_Weasel

  1. Spice_Weasel
    Post

    NAT and Access Lists

    A quick note about jonny7_2002's nat and access-list from above - access-list 101 should look like this: access-list 101 permit tcp host...
    Post by: Spice_Weasel, Mar 23, 2011 in forum: Routing & Switching
  2. Spice_Weasel
    Post

    Telnetting without SecureCRT, hyperterminal or putty

    Kobem, The most likely reason they required you to ssh to the 7609, and from there to telnet to the 877's is to control access to the 877's....
    Post by: Spice_Weasel, Mar 23, 2011 in forum: General Cisco Certifications
  3. Spice_Weasel
    Post

    Cisco 877 not getting full ADSL speed?

    Something to check - you mention cpu usage is 95%, but what process is responsible? Use "sh proc cpu sort 5sec" and see what process is eating...
    Post by: Spice_Weasel, Jan 27, 2011 in forum: Routing & Switching
  4. Spice_Weasel
    Post

    Tearing my hair out with 877 wireless config

    The advanced ip services image is very fully featured, there is no problem with the features available. But your router has a somewhat older...
    Post by: Spice_Weasel, Dec 29, 2010 in forum: Routing & Switching
  5. Spice_Weasel
    Post

    Configure PIX 501 pptp

    Unfortunately you may need to terminate the pptp on the pix rather than the server. PPTP requires tcp 1723 and gre, so simply permitting and...
    Post by: Spice_Weasel, Dec 9, 2010 in forum: Network Security
  6. Spice_Weasel
    Post

    Internet on Cisco ADSL 837 Router

    The problem is that your inside hosts are not being nat'ed. You have ip nat inside and outside staements on the correct interfaces, and a suitable...
    Post by: Spice_Weasel, Nov 1, 2010 in forum: Routing & Switching
  7. Spice_Weasel
    Post

    Cisco 877 Zone-Based Firewall - is this right?

    Hi Jim, There a few problems with your config. The main problem is that although you have specified a zone-pair to allow some traffic in, you...
    Post by: Spice_Weasel, Oct 13, 2010 in forum: General Cisco Certifications
  8. Spice_Weasel
    Post

    Help! Trying to assign WAN IP to Cisco 877

    BTW, you don't need to use your internal interface for the extra address space from your ISP. Just set up the nat rules on the external interface....
    Post by: Spice_Weasel, Jul 21, 2010 in forum: Routing & Switching
  9. Spice_Weasel
    Post

    Port forwarding on 877W Router over ADSL

    Since you are using the zone-based firewall you'll need to do more than just make a nat translation for tcp 25 and 80 to the server. You have two...
    Post by: Spice_Weasel, Jun 9, 2010 in forum: Routing & Switching
  10. Spice_Weasel
    Post

    Basic frame relay not working =[

    Hi vish112, Since it shows down/down on both sides I suggest temporarily configuring it as a standard serial connection to confirm there are no...
    Post by: Spice_Weasel, Jun 9, 2010 in forum: Routing & Switching
  11. Spice_Weasel
    Post

    Cisco 877 Router No DNS Traffic

    In your config, as posted above, the internal hosts won't be able to do much at all. On your dialer interface the access-list outside-in blocks...
    Post by: Spice_Weasel, Apr 30, 2010 in forum: General Cisco Certifications
  12. Spice_Weasel
    Post

    deny user connect ssh

    The simple solution is to stick an access-list on your vty lines, e.g.: access-list 50 permit 10.10.10.0 0.0.0.15 log access-list 50 deny any...
    Post by: Spice_Weasel, Apr 30, 2010 in forum: General Cisco Certifications
  13. Spice_Weasel
    Post

    Static Link Aggregation vs Dynamic Link Aggregation

    Dynamic refers to the capability to use lacp to allow both sides to negotiate the link. Spice Weasel
    Post by: Spice_Weasel, Apr 27, 2010 in forum: Networks
  14. Spice_Weasel
    Post

    Problem Cisco 877 no t'internet - help!

    Hi markyzno, I notice you have two dialer interfaces configured, and you have an atm subinterface but you are not using it. I would suggest some...
    Post by: Spice_Weasel, Apr 8, 2010 in forum: Internet, Connectivity and Communications
  15. Spice_Weasel
    Post

    DHCP and IPs assign to specific PCs

    The best way to prevent static ip addresses is with switch security. The are many technologies available to control access to your network,...
    Post by: Spice_Weasel, Mar 31, 2010 in forum: Networks
Remove Advertisement - Premium Membership
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Accept Learn More...