1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Working with IVR

Discussion in 'Routing & Switching' started by Sceritz, Jan 30, 2016.

  1. Sceritz

    Sceritz Bit Poster

    24
    0
    14
    I have a network with 5 switches (2960) and one Router, a 2911. I created Vlans 2-5 with names and put one Vlan on each switch, making the ports the end devices are connected to, access ports. The router itself has subinterfaces for each vlan and a DHCP server with multiple pools. For some reason I can't ping a PC outside of its VLAN despite the router being there. Any help or ideas? For some reason I cannot upload the pkt file here so I put it on my drive.

    https://drive.google.com/file/d/0BwWbSWn1tcDbdmRTa19TS3RLRHM/view?usp=sharing
     
  2. Sceritz

    Sceritz Bit Poster

    24
    0
    14
    Well I was able to get it to work though I didn't do anything, which is frustrating. I don't feel comfortable. I don't know why it wasn't working. I didn't change any interface settings.

    SN: Why can't I use the "sh ip dhcp pool" command in this 2900 series router?
     

Share This Page

Loading...