1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WEBVPN

Discussion in 'Networks' started by Suttar, Dec 10, 2008.

  1. Suttar

    Suttar Byte Poster

    114
    2
    27
    Hi Guys, need some advice. I am involved in setting up a client VPN at work. We had set up a webVPN with port forwarding as an easy solution for telnet to devices. But now Timbuktu is required and it doesn't work too well with the port forwarding. The users already have a client VPN installed by our company so installing the Cisco VPN client is a no go. any Ideas? is it possible to setup Juniper to connect to a ASA 5510 using a client VPN?
     
    Certifications: Hnc Comp & Bsc Networking, ITIL v3
    WIP: CCNA
  2. Spice_Weasel

    Spice_Weasel Kilobyte Poster

    254
    45
    45
    A site to site vpn can be created between a 5510 and a Juniper Netscreen (or router) - vpn client spftware will not be required. If you are asking if the Juniper vpn client software can connect to a 5510, I am not sure. But you can always configure access via L2tp/ipsec if needed, no extra client software required, xp/vista/mac all have built in client software.

    Spice_Weasel
     
    Certifications: CCNA, CCNP, CCIP, JNCIA-ER, JNCIS-ER,MCP
    WIP: CCIE

Share This Page

Loading...