1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

show ip route and protocols

Discussion in 'General Cisco Certifications' started by sendalot, Feb 15, 2013.

  1. sendalot

    sendalot Nibble Poster

    63
    0
    16
    Regarding "show ip route" command and protocols.

    If the table says (other than directly connected ones)

    10.2.2.1 via 198.162.22.52

    or

    10.3.4.2 via serial 0/1

    Does it mean, in order to get to 10.2.2.1, go through 192.162.22.52? OR
    to get ot 10.3.4.2, go through serial 0/1?

    Thanks.
     
    WIP: A+

Share This Page

Loading...