Need help with VLSMing the following topology

Discussion in 'General Cisco Certifications' started by packet_sniffer, Jan 21, 2009.

  1. packet_sniffer

    packet_sniffer New Member

    1
    0
    1
    Hi.
    I need help with VLSMing the topology that is attached to the post.

    The point is that I have been assigned public subnet IP 192.1.1.0/24, and I have to VLSM it for all WAN connections and outside address range of 5 IPs. For LAN subnets I need to use use private IPs of my choice, for example:
    class A on ISP with class B subnet mask, and class B on Sydney and Auckland with class C subnet masks.

    I've just almost understood simple subnetting, and now this came up and Im really confused.

    Thanks
     

    Attached Files:

  2. HaDeS666

    HaDeS666 Bit Poster

    25
    1
    20
    There is no point of us doing your home work for you, as you will never understand.

    But here goes:


    1st WAN link
    192.168.1.0/30 (subnet address)
    192.168.1.1 (first interface address)
    192.168.1.2 (second interface address)
    192.168.1.3 (broadcast address)

    2nd WAN link
    192.168.1.4/30 (subnet address)
    192.168.1.5 (first interface address)
    192.168.1.6 (second interface address)
    192.168.1.7 (broadcast address)


    ISP:

    10.0.0.0/16

    Sydney:

    172.16.0.0/24

    Auckland:

    172.16.1.0/24

    I don't really know what you mean by " outside address range of 5 IPs "

    Try this to get to grips with VLSM:

    http://www.tcpipguide.com/free/t_IPVariableLengthSubnetMaskingVLSM.htm
     
    Certifications: A+ and CCNA
    WIP: MCSA then onto MCSE

Share This Page

Loading...
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.