1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Dialer or ATM interface?

Discussion in 'Routing & Switching' started by Stoney, Oct 23, 2007.

  1. Stoney

    Stoney Megabyte Poster

    731
    23
    69
    Hi,

    I'm trying to setup a Cisco 857w with an ADSL connection, but this Cisco malarky is all quite new to me! :blink

    I have a dialer interface and an ATM interface configured on the router, and I want to assign a static IP that has been provided by my ISP.

    Should I assign the IP to the dialer or ATM interface?

    Thanks,
     
    Certifications: 25 + 50 metre front crawl
    WIP: MCSA - Exam 70-270
  2. khristov

    khristov New Member

    1
    0
    1
    Most probably your service provider uses PPPoA (PPP over ATM) and the atm is used for just to dial out the connection. The IP address should be negotiated via IPCP (this is part of the PPP process) and you should use "ip address negotiated" on the dialer interface
     

Share This Page

Loading...