1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

For Sale Cisco 1841 Router Including 2 x WIC-1 SHDSL V3 Modules

Discussion in 'Sales and Swaps' started by craigie, Oct 6, 2010.

Thread Status:
Not open for further replies.
  1. craigie

    craigie Terabyte Poster

    3,020
    173
    155
    For sale on fleabay, yes it my first ever sale http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=290484230552&ssPageName=STRK:MESELX:IT

    It is in excellent working order and comes complete with 2 x WIC-1 SHDSL V3 Modules.

    The Cisco 1841 Integrated Services Router provides the following support:

    •Wire-speed performance for concurrent services at T1/E1 WAN rates
    •Enhanced investment protection through increased performance and modularity
    •Enhanced investment protection through increased modularity
    •Increased density through High-Speed WAN Interface Card Slots (two)
    •Support for over 90 existing and new modules
    •Support for majority of existing WICs, VWICs, and VICs (data mode only)
    •Two Integrated 10/100 Fast Ethernet ports
    •Security
    ◦On-board encryption
    ◦Support of up to 800 VPN tunnels with the AIM Module
    ◦Antivirus defense support through Network Admission Control (NAC)
    ◦Intrusion Prevention as well as stateful Cisco IOS Firewall support and many more essential security features

    More information at http://www.cisco.com/en/US/prod/collateral/routers/ps5853/product_data_sheet0900aecd8016a59b.html

    Show Version

    Cisco IOS Software, 1841 Software (C1841-BROADBAND-M), Version 12.4(2)XA, RELEASE SOFTWARE (fc3)
    Synched to technology version 12.4(3.9)T
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2005 by Cisco Systems, Inc.
    Compiled Sun 09-Oct-05 23:35 by ealyon

    ROM: System Bootstrap, Version 12.3(8r)T9, RELEASE SOFTWARE (fc1)
    ROM: Cisco IOS Software, 1841 Software (C1841-BROADBAND-M), Version 12.4(2)XA, RELEASE SOFTWARE (fc3)

    Router uptime is 0 minutes
    System returned to ROM by power-on
    System image file is "flash:c1841-broadband-mz.124-2.XA.bin"

    Cisco 1841 (revision 6.0) with 114688K/16384K bytes of memory.
    Processor board ID FHK10115007
    2 DSL controllers
    2 FastEthernet interfaces
    DRAM configuration is 64 bits wide with parity disabled.
    191K bytes of NVRAM.
    31360K bytes of ATA CompactFlash (Read/Write)
    Configuration register is 0x2102

    Show Inventory

    NAME: "1841 chassis", DESCR: "1841 chassis, Hw Serial#: 1310933273, Hw Revision: 6.0"
    PID: CISCO1841 , VID: V03 , SN: FHK10115007

    NAME: "WIC/HWIC 0", DESCR: "WAN Interface Card - ATM (With GSHDSL-F module)"
    PID: WIC-1SHDSL-V3 , VID: V01 , SN: FOC101007PY

    NAME: "WIC/HWIC 1", DESCR: "WAN Interface Card - ATM (With GSHDSL-F module)"
    PID: WIC-1SHDSL-V3 , VID: V01 , SN: FOC1003002Z
     
    Certifications: CCA | CCENT | CCNA | CCNA:S | HP APC | HP ASE | ITILv3 | MCP | MCDST | MCITP: EA | MCTS:Vista | MCTS:Exch '07 | MCSA 2003 | MCSA:M 2003 | MCSA 2008 | MCSE | VCP5-DT | VCP4-DCV | VCP5-DCV | VCAP5-DCA | VCAP5-DCD | VMTSP | VTSP 4 | VTSP 5

Share This Page

Thread Status:
Not open for further replies.
Loading...