1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Booting problem

Discussion in 'Routing & Switching' started by kammodo, May 27, 2008.

  1. kammodo

    kammodo Nibble Poster

    56
    0
    33
    Hi all,

    Im having trouble getting my cisco router to boot the IOS image automatically. Every time I start the thing up, it loads straight into rommon mode and I have to manually boot from there. Ive tried

    Router(config)#no boot system
    Router(config)#boot system flash:c3660-is-mz.123-1.bin

    but with no luck. Any usefull suggestions would be appreciated.
     
    Certifications: CCNA R+S, CCDA , CCNP r+s , CCDP
    WIP: CCIE
  2. Spice_Weasel

    Spice_Weasel Kilobyte Poster

    254
    45
    45
    Most likely the config register is set to boot into rommon. Do sh ver to see the config register value.

    Here is a listing of the conf reg values for the 3600 series:

    http://www.cisco.com/en/US/docs/routers/access/3600/hardware/installation/guide/3600appC.html

    Spice_Weasel
     
    Certifications: CCNA, CCNP, CCIP, JNCIA-ER, JNCIS-ER,MCP
    WIP: CCIE

Share This Page

Loading...